Workbench.

Used 2x4s and 3/4 inch plywood to build a 3' x 8' bench. Bench is anchored to the concrete block wall.

This is the epoxy pump which I rebuilt.  It may look ugly, but it has new seals and reservoirs, and it works great.

I placed an air compressor/tank in the corner above the sprinkler pump.

I built the platform with 2x4s and 3/4" plywood.  Also anchored to the walls.

Added a power drop.

On the output of the tank a dryer, then up to a distribution manifold which runs across the entire width of the garage.

Air distribution system.  Air quick connects and 1 1/2" PVC pipe.

Three Mixes

  Left: Epoxy mix. 

Center: Epoxy with milled fiber

Right: Epoxy mixed with micro balloons (micro).